クイックル　ちょいがけモップ

How to assemble and use
1 Assemble the mop
Align the direction of the hole in the head and protrusion in the handle. Insert until you hear a clicking sound. (Once assembled, it cannot be disconnected)

2 Set 2 sheets onto the wiper
Set the sheets on both sides of the head. Put the hooks through the holes (notches) in the edges of the sheets and secure them.

How to extend and retract the handle
① When extending
Hold B and slowly extend while holding grip A in place.
Applying too much force or pulling from both sides to extend may cause the tool to crack or the handle to come out. Do not use if damaged, as this may result in injury to your fingers or hands.

② When retracting
Fold the head after holding B and slowly retracting while holding grip A in place.
* Can adjust the length by stopping in the middle at your desired length.

Fix the head to have the tool handy
Insert the hook into the fixing hole on the head.

Precautions
● Do not use for other than the intended use.
● Wipe with light force.
● Sheets cannot be washed.
● Do not use when the sheet has grains of sand or hard dirt attached. (This may damage LCD screens and furniture.)
● Sheets are not water-absorbent and should not be used on wet areas.
● Do not use on rough surfaces and on wood with rough surfaces. The fibers of the sheet may come off.
● Turn off items that are hot, such as light bulbs, and clean after they have cooled. (It may melt when used on surfaces with high temperature.)
● Turn off the TV or other appliances before cleaning as static electricity can make it difficult to remove dust.
● Avoid direct sunlight and keep away from areas with high temperatures. It may become discolored or deformed.
● Do not leave the sheet on unfinished wood, vinyl floors and furniture for long periods of time. They may become discolored.
● When using, do not wipe, adjust lengths or swing with strong force. Applying too much force may cause the tool to break or the handle to come out.
● Do not force the tool into gaps where it cannot fit. The sheet may come off or the tool may break. If it is dislodged, secure it firmly with a rubber band.
● Do not lean the tool against a wall with the tip pointing downwards while the hook is inserted into the head’s fixing hole and secured in place. The tool tip may deform.

Made in China